User Manual for Safety Ladder Stabilizing Car (JZ-5/400 Type Sinking Winch) The JZ-5/400 winch can work when it is powered on, and the safety ladder can be used to stabilize the vehicle. It can work when it is powered on, or when it is powered off. Stabilizing the sinking winch Z-5/600 sinking winch In case of power outage: When operating, first turn off the power switch, put down the brake tongue directly behind the large gear, confirm to put it down, release the electric brake push rod, and then press the two randomly equipped handles of our factory on both ends of the high-speed shaft of the reducer. Once the two handles are pressed, they can start working. Sinking winch safety ladder stable vehicle In the case of power on, after manual operation is completed, remove the handle first, then adjust the electric brake and hydraulic thruster push rod to the state before releasing, and then lift the tongue behind the gear. After the above operations are completed and confirmed to be correct, power on work can be carried out. Special reminder (mobile/WeChat: 13333923694): During manual operation, a dedicated person is required to be responsible for the power switch.